MediStreams Oxygen Medical Copper Pipelines is Manufacturing R250 (Half Hard) Straight EN 13348 Copper Pipes and Copper Tubes with their specifications being Medical Oxygen and Medical Gas Pipeline Systems (MGPS). MediStreams medical copper pipes and tubes comply with the European Standard of EN 13348 which assures high purity, mechanical strength, and durability. MediStreams Oxygen Medical Copper Pipes are degreased, capped and packed to be clean and conforming to healthcare standards ideal in cleanroom installation.
R250 (Half Hard) 13348 Copper Pipe and Tube – Straight : Specifications
- Standard: EN 13348 – Seamless Copper Tube for Medical Gas and Vacuum Installations
- Material: Copper (Cu-DHP) – CW024A
- Temper: R250 (Half Hard)
- Manufacturing Type: Seamless, Straight Length
- Surface Finish: Degreased, Cleaned, and Capped
- Marking: EN 13348 Copper Tubes
- Certification: BS EN 10204 3.1 / 3.2
- Applications: Oxygen, Nitrous Oxide, Medical Air, Carbon Dioxide, Vacuum, and AGSS
Get Quotation
Call For Info
Get CatalogueR250 (Half Hard) – Straight EN 13348 Copper Pipe and Tube : Dimension and Sizes
Medistreams Oxygen Medical Copper Pipelines R250 Half Hard EN 13348 Copper Pipes are offered in different diameters and wall thickness in order to fit the various medical gas installation specifications. The Copper tubes and copper pipes are internally washed and provided with end caps made of plastic so as to provide good handling without contamination.
R250 (Half Hard) – Straight EN 13348 Copper Pipe and Tube : Dimension and Sizes | ||
|---|---|---|
| Outside Diameter (mm) | Wall Thickness (mm) | Length (m) |
| 6 | 0.8 | 5 |
| 8 | 0.8 | 5 |
| 10 | 1.0 | 5 |
| 12 | 1.0 | 5 |
| 15 | 1.0 | 5 |
| 22 | 1.0 | 5 |
| 28 | 1.0 | 5 |
| 35 | 1.2 | 5 |
| 42 | 1.2 | 5 |
| 54 | 1.2 | 5 |
| 64 | 1.5 | 5 |
| 76 | 1.5 | 5 |
R250 (Half Hard) – Straight EN 13348 Copper Pipe and Tube : Uses
- Oxygen Pipeline Systems, Medical.
- Nitrous Oxide and Vacuum Lines.
- Hospital gas supply systems in the center.
- Laboratory and Pharmaceutical Installations.
- Medical Equipment Production Plants.
- Healthcare Infrastructure Projects and Cleanrooms.
FAQ (Frequently Asked Questions)
Why has to change piping when installing new aircon with R32 from old R22 ?
When replacing an old R22 air conditioner with a new R32 system, the existing piping may need to be replaced because old pipes can contain residual oil, moisture, or contaminants that can affect the performance and reliability of the new refrigerant. Additionally, R32 systems operate at higher pressures, so the piping must meet the required wall thickness and quality standards for safe operation.
Can we use old copper pipe for new AC ?
Yes, old copper pipes can sometimes be reused for a new AC, but only if they are in excellent condition, the correct size and wall thickness, and thoroughly cleaned to remove old refrigerant oil and contaminants. An HVAC technician should inspect the piping to ensure it is compatible with the new system and meets the manufacturer’s installation requirements.